TraxxasSledge 1/8 Scale 4WD Brushless Electric Monster Truck Green
What’s In The Box:
- Sledge, Ready-To-Race® monster truck with Traxxas 2000kV brushless motor
- VXL-6s waterproof electronic speed control with integrated telemetry
- Quick Start Guide
- TQi™ 2.4GHz radio system
- High quality maintenance tools
- Jumper plug (for 4s battery use)
What You’ll Need:
- LiPo Batteries
Traxxas recommends dual 5000mAh 3-cell 11.1V Power Cell LiPo batteries for maximum performance. Dual 7600mAh 7.4V LiPo batteries or a single 6700mAh 14.8V LiPo battery will operate the vehicle with reduced performance. NiMH batteries are not supported.
- LiPo Balance Charger with iD™
Traxxas EZ-Peak® Live 4s-capable charger is recommended for easy and fast charging performance (model #2971).
- AA Alkaline Batteries
Four AA alkaline batteries for the transmitter.
- VXL-6s Waterproof Electronic Speed Control
- 6s LiPo compatible
- Integrated cooling fan
- Real-time telemetry via Traxxas Link™
- 3-LED status indicators
- Powered accessory ports
- 10-gauge silicone wire
- Patented Traxxas High-Current Connectors
- Velineon® 2000kV Brushless Motor
- 4-pole 2000kV brushless motor
- 5mm output shaft
- Finned can for better heat dissipation
- Aluminum motor cradle mount
- Supports entire motor
- Reduces flex for longer gear life
- Up to 70+ mph with Two 3s LiPo Batteries
- Traxxas Stability Management® (TSM)
- Improves straight line acceleration and braking on low-traction surfaces
- Never dulls throttle or slows the truck
- Adjusts from off to 100% assistance from the transmitter
- TQi™ 2.4GHz High Output Radio System
- TQi™ 2-channel transmitter
- Automatically stores and loads settings for up to 30 Traxxas Link-enabled models
- Programmable multi-function knob
- Adjustable steering and throttle percentage (dual rates)
- Adjustable steering and throttle sensitivity (exponential)
- Adjustable steering and throttle end points
- High 13ms frame rate and near-zero latency for responsive control
- 5-channel micro receiver (#6533) with fail-safe security
- Patented waterproof receiver box with easy-access plug
- Drivetrain
- Heavy-duty steel driveshafts
- Large 8mm steel stub axles
- Steel dogbone center driveline
- Protective rubber boots on differential inputs
- Transmission
- Mod-1 pinion and spur gears
- Fixed gear mesh system
- Torque-Biasing Center Drive
- Differentials
- Heavy-duty sealed 4-gear design
- Large scale steel ring and pinion gears
- Oversize 8mm output shafts
- Steel drive cups
- Easy-access bulkheads
- Oil-filled GT-Maxx® Shocks
- Longer rear shocks for more travel
- Machined aluminum threaded body
- Extra-large bore and capacity
- Large-diameter damper shaft
- Lower cartridge with dual X-rings
- Height-adjustable spring retainer
- Lower spring perches bolted on
- Suspension
- Performance-optimized geometry
- Ultra-tough composite arms
- Made from our strongest cold-weather material
- Molded insert for clean look
- Rear rock deflectors
- Press-in hinge pins to reduce play
- Oversize molded toe and camber links
- Heavy-duty C-hubs
- Stronger than conventional designs
- Require no adjusments
- Multiple mounting points for suspension tuning
- Chassis
- 3.2mm ribbed aluminum chassis
- Formed edges for improved strength
- Thick T-Bar™ for added rigidity
- Stronger than round bars
- High-strength buttressing on shock towers
- Ultra-thick 5mm 6061-T6 aluminum shock towers
- Rugged locking battery compartment with quick-release door
- Low-CG design for improved handling
- Interlocking components for tight tolerances
- Tough front and rear bumpers double as skid plates
- Hidden wire management for clean appearance
- ProGraphix® Body
- Clipless body mounting system
- Rigid internal frame
- Molded body reinforcements for tear-through protection
- Protective roof skids
- Rugged high-downforce rear wing
- Wheels and Tires
- Huge 6.7” Sledgehammer® all-terrain tires
- TSM-rated construction resists ballooning
- Tough 3.8” black wheels
- Splined 17mm aluminum axle hubs
- Steering
- High-throw bellcrank steering design
- Heavy-duty servo saver with aluminum posts
- Metal servo horn
- Powerful #2275 metal gear servo
- 347 oz-in torque
- Fully waterproof
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
Specifications:
- Length (including wing):23.78 inches (604mm)
- Front Track:18.10 inches (459mm)
- Rear Track:18.10 inches (459mm)
- Ground Clearance:1.95 inches (50mm)
- Weight (no battery):12.74 pounds (5.77kgs)
- Height (overall): 8.43 inches (214mm)
- Wheelbase:15.10 inches (384mm)Shock
- Length (front):5.12 inches (128mm)Shock
- Length (rear):5.67 inches (144mm)
- Tire Diameter:6.7 x 3.3 inches (170mm x 84mm)
- Wheel Diameter:3.8 inches (97mm)
- Speed Control:Velineon® VXL-6s (#3485)
- Motor (electric):Velineon® 2000kV Brushless
- Overall Drive Ratio:17.2 (13/52 motor pinion and spur gear)
- Differential Type: Sealed, hardened steel bevel, limited slip
- Gear Pitch: Module 1.0
- Chassis Structure/Material: 3.2mm aluminum plate
- Brake Type: Electronic
- Drive System: Shaft-driven 4WD
- Steering: Double-shear bellcrank w/metal servo arm
- Wheels & Tires: 3.8” wheels, pre-glued Sledgehammer® Tires & foam inserts; 6.7×3.8
- Radio System: 2-Channel, TQi™ 2.4GHz Transmitter with TSM® receiver
- Servo: 2275 Waterproof, metal-gear (347oz-in torque)
- Top Speed: 70+ MPH with two 3S LiPo batteries and optional gearing (sold separately)
- Skill Level: 4
- Battery Tray: Narrow configuration (L/W/H): 181mm x 50mm x 29/37/45mm*
- Wide configuration (L/W/H): 160mm x 57mm x 29/37/45mm*
- Required Batteries: 4 “AA” (transmitter), Vehicle (see battery finder)
