Cerix II RS-160 Racing Factory Black/Silver 2S-3S ESC Sensored/Sensorless

Description

Cerix II RS-160 Racing Factory Black/Silver 2S-3S ESC Sensored/Sensorless

The Team Corally CERIX II RS-160 “RACING FACTORY” electronic speed controller for sensored and sensorless motors is fine tuned for today’s high power brushless motors. Everything can be set-up on these controllers to provide you the best functionality and performance.
The CERIX II RS-160 “RACING FACTORY” is manufactured with the highest grade components to ensure the lowest possible internal resistance, resulting in optimized performance. The CERIX II RS-160 “RACING FACTORY” controller gives the 1/10 On-Road and 1/10 Off-Road competition racer what he needs. You will experience the best controllability of your 1/10 Racing Cars, no matter if you use it with Spec or Modified motors

Features:

• For sensored and sensorless motors
• Manufactured with the highest grade components
• Ultra compact design
• Aluminum case for improved heat dissipation
• Built in Capacitors
• Built in power switch
• Advanced boost and turbo timing system for improved acceleration performance
• Enhanced throttle and brake control function.
• 10 programmed profiles can be stored in the ESC
• Adjustable BEC voltage 6.0V 5A or 7.4V 5A Current
• Powerful TC Link software to test motor timing and advise the best ESC timing setting

Programming Features:
General Settings

• Running Mode
• Cut-off Voltage
• Overheat protection
• Motor Rotation
• Reverse Speed

Throttle Control

• Dead Band
• Punch Rate SW- Point
• Punch Rate 1
• Punch Rate 2
• Throttle Curve

Brake Control

• Initial Brake
• Drag Brake
• Brake Strength
• Brake Rate Control
• Brake Curve

Boost Function

• Boost Timing
• Start RPM
• End RPM
• Boost Constraint
• Boost Slope

Turbo Timing

• Turbo Timing
• Activation Method
• Turbo Delay
• Start RPM
• Turbo Slope

Power Specs:

• Application: 1/10 Touring – 1/10 Pan Car – 1/10 Off-Road – Crawlers
• Cont. Current (A): 160A
• Burst (A): 800A
• Nr of Li-xx Cells: 2 – 3S
• BEC: 6V 5A or 7.4V 5A
• Motor Type: Sensored – Sensorless
• Motor Limits:
  2S Li-Po
  => 3.5T – 1/10 On-Road
  => 5.5T – 1/10 Off-Road
  3S Li-Po
  => 5.5T – 1/10 On-Road
  => 8.5T – 1/10 Off-Road
• Resistance: 0.00018 ohm
• Dimensions: 37x33x22mm (30mm Fan)
• Weight: 43g (51g Fan)